Get Paid To Promote, Get Paid To Popup, Get Paid Display Banner -->

Saturday, August 28, 2010

Austin Healey 100 Cars And The History Of It

BN2 Austin Healey 100Picture Of 1956 Austin Healay 100 Cars

Production Austin Healey 100s Cars were finished at Austin's Longbridge plant alongside the A90 and based on fully trimmed and painted body/chassis units produced by Jensen in West Bromwich — in an arrangement the two companies previously had explored with the Austin A40 Sports. The first 100s (series "BN1") were equipped with the same 90 bhp (67 kW) engines and manual transmission as the stock A90, but the transmission was modified to be a three-speed unit with overdrive on second and top. The 2660 cc I4 engine featured an undersquare 87.3 mm (3.4 in) bore and 111.1 mm (4.4 in) stroke.

BN1 Austin Healey 100Picture Of Austin Healay 100M Cars

Girling 11 in (279.4 mm) drum brakes are fitted all round. Front suspension is independent using coil springs and at the rear is a rigid axle with semi elliptic leaf springs. The steering is by a cam and lever system.

BN2 Austin-Healey 100Picture Of 1956 Austin Healay 100 Cars

A BN1 tested by The Motor magazine in 1953 had a top speed of 106 mph (171 km/h) and could accelerate from 0-60 mph (97 km/h) in 11.2 seconds. A fuel consumption of 22.5 miles per imperial gallon (12.6 L/100 km; 18.7 mpg-US) was recorded. The test car cost £1063 including taxes.

BN1 Austin-Healey 100Picture Of 1954 Austin Healay 100 Cars

These were built from May 1953, and replaced by the BN2 model in mid-1955.

No comments:

Post a Comment